Tsugami B0206
Tsugami B0206
4 febrero, 2016
Tsugami B0326
Tsugami B0326
5 febrero, 2016

Tsugami B0325

Tsugami-B0325

Tsugami B0325 - II

32 mm, 5-Axis Opposed Gang Tool CNC Lathe

Swiss Turning Performance, Job Shop 5-Axis Flexibility

The Tsugami B0325 32mm 5-axis Swiss Type Lathe is the basic building block for the 32mm Swiss turn category in the B0 family. But even this "basic" model comes loaded with high-end performance features. A 4-Spindle Cross Rotary Tool is standard on the front tool post and a deep-hole drill holder (up to 100mm length) is standard next to the back spindle. 

The B0325 - II includes Tsugami's gang type tool post, rigid cast iron frame and 8,000 rpm main spindle speed. This CNC automatic lathe offers a total of 27 tool positions in standard configuration, 39 in optional configuration. The modular tool zone makes it easy to change rotary tools, ID holders and turning holders.

Key Advantages Include:

  • Enhanced 5-axis Swiss Style Lathe at minimal investment cost
  • 27 Tool Positions Standard, Optional 39: Combination of rotary tools, ID holders and turning holders
  • Additional Tool Post Beside Back Spindle - Deep Hole Drilling capability up to 100mm 
  • Optional Rotary Tool Position - Back Spindle
  • 320mm Stroke, 70mm when used in "chucker" mode
  • Rapid Traverse Rate of 32 m/min - shortens idle and cycle times
  • Fanuc 0i-TD CNC

The Tsugami B0325 - II is CONVERTIBLE and may be run as a traditional sliding headstock Swiss Type Lathe using the guide bushing or run without the guide bushing with the addition of an optional "chucker" kit. When run as a "chucker" the lathe can use drawn bar stock instead of centerless ground stock, dramatically reducing remnant size and increasing shop flexibility.

Features

Maximum Bar Stock 32mm
# Axes 5
Sliding Headstock / Guide Bushing YES
CONVERTIBLE: Run w/o Guide Bushing (chucker) YES
Max  Length: with Guide Bushing
Max Length: w/o Guide Bushing

320mm, 12.6”
70mm, 2.75”

# Tool Positions (std / max) 27/39
# Live Tool Positions (std / max)  Varies by options   
Control FANUC 0i-TD
Main Spindle  Speed 200 – 8,000 rpm
Sub Spindle Speed 200 - 8,000 rpm
Live Tool Speed 5,000 rpm
Main Spindle Motor 3.7 / 5.5 kW
Weight 7.496lbs., 3,400kg
Footprint:  W x D x H 84.6”  x 50.3” x  75.9”; 2,150× 1,280× 1,930mm

Options:

  • Rear Drive Rotary Tool
  • Back Rotary Tool
  • Rotary Tool Beside Back Spindle
  • Direct-Drive Guide Bushing
  • "Chucker Kit"
  • Cross Rigid Tap
  • Back Rigid Tap