Tsugami B0124
Tsugami B0124
2 febrero, 2016
Tsugami B0125
Tsugami B0126
3 febrero, 2016

Tsugami B0125

Tsugami B0125

Tsugami B0125-II

12 mm, 5-Axis Opposed Gang Tool CNC Lathe

Simultaneous Machining, 21 Tool, 5-axis Swiss Turn

The B0 family of Tsugami CNC Automatic lathes are designed to give you exactly the capability and capacity you need at an affordable price. Each incremental model adds features to the core B0 CNC lathe representing years of Tsugami testing and research.

The B0125-II 12mm 5-axis convertible Swiss turn adds an independent back tool post to the B0 configuration and introduces two rotary tool positions on the back tool post (optional). These improvements enable front and back spindle simultaneous machining, a time-tested method for reducing cycle time.

Economically priced like other B0 CNC lathes, the B0125-II includes many high-end features such as Tsugami's gang type tool post, rigid cast iron frame and 12,000 rpm main and sub spindle speed. This CNC automatic lathe offers a total of 21 tool positions: 9 OD tool positions and 12 fixed tool positions (optional 2 rotary positions for rear) for flexible 5-axis machining.

Key Advantages Include:

  • Enhanced 5-axis Swiss Style Lathe at minimal investment cost
  • Increased Back Spindle Capability - Spindle plus 8 fixed and rotary tools for simultaneous machining
  • 21 Total Tool Positions - 9 OD and 4 fixed front, 8 fixed rear or 6 fixed and 2 rotary (option)
  • Back Milling Operations - off-center drilling/tapping and end milling may be performed simultaneously with main spindle (option)
  • 170mm Stroke, 45mm when used in "chucker" mode
  • Rapid Travers Rate of 32 m/min- Shortens idle and cycle times
  • Enriched NC Functions Standard - tool nose radius compensation, chamfering and corner rounding and cutoff detection, plus many more...
  • Fanuc 0i-TD CNC Control

The Tsugami B0125-II is CONVERTIBLE and may be run as a traditional sliding headstock Swiss Style Lathe using the guide bushing or run without the guide bushing with the addition of an optional "chucker" kit. When run as a "chucker", the turning center can use drawn bar stock instead of centerless ground stock, dramatically reducing remnant size and increasing shop flexibility. 


Maximum Bar Stock 12 mm
# Axes 5
Sliding Headstock / Guide Bushing YES
CONVERTIBLE: Run w/o Guide Bushing (chucker) YES
Max  Length: with Guide Bushing
Max Length: w/o Guide Bushing

170 mm, 6.69”
45 mm, 1.77”

# Tool Positions (std / max) 21
# Live Tool Positions (std / max) 2 (optional)
Control FANUC 0i-TD
Main Spindle  Speed 200 – 12,000 rpm
Sub Spindle Speed 200 - 12,000 rpm
Live Tool Speed 5,000 rpm
Main Spindle Motor 1.5  / 2.2 kW
Weight 3,474 lbs., 1,700kg
Footprint:  W x D x H 64.5”  x 42.5” x  66.9”; 1,640  × 1,080 × 1,700 mm


  • Cross Rotary Tool
  • Back Rotary Tool
  • "Chucker" Kit
  • Direct-Drive Guide Bushing
  • C-Axis
  • Cross Rigid Tapping